Pigeon Compact Steam Sterilizer

Pigeon Compact Steam Sterilizer Features

• It comes with interchangeable compartments, and there are three possible combinations in this sterilizer.
• An accessory tray needs to be attached to the heating tray for sterilizing pacifiers and smaller items.
• For sterilizing breast pump parts and other medium-sized accessories, a bottle chamber has to be fixed.
• Place the teats, hoods, and caps inside the accessory tray and bottles inside the bottle chamber.
• Slim and compact design.
• It takes 12 minutes for one cycle of sterilization.
• The sterilizer body material is made up of Polypropylene, whereas the heater is manufactured using stainless steel.

Pigeon Compact Steam Sterilizer Specifications

• Weight: 778 g
• Dimension: 17.5 x 10 x 34.3

How to use Pigeon Compact Steam Sterilizer

• Disassemble all the parts of the Pigeon Compact Steam Sterilizer.
• Take the lid, which acts as a measuring cup, and add 50 ml of water to the base.
• Fix the bottle chamber on the sterilizer base.
• Place the bottles upside down.
• Now, fix the accessories case and place all bottle accessories upside down.
• Close the lid.
• Plug-in the cable.
• Switch ON the power button to start the sterilization process.
• The sterilizer automatically turns off after the sterilization process.
• Switch off the main switch and remove the cable.
• Allow the sterilizer to cool down completely.
• Remove the accessories and bottles one-by-one using a tong.

• The sterilization process takes 10 to 12 minutes.

Lemon:

• Cut the lemon into two halves.
• Squeeze the lemon juice into the heating plate.
• Leave the lemon juice for 30 minutes.
• Do not boil it.
• Wipe the heating plate.
• Drain the excess liquid and rinse with water.

Vinegar and Water:

• Add 20 ml of water to 10 ml of vinegar.
• Pour the mixture into the heating plate.
• Switch ON the sterilizer for 2 minutes.
• Switch OFF the power.
• Let the solution rest for 30 minutes.
• Drain the solution and rinse thoroughly.

Water:

• Add 50 ml of water to the heating plate.
• Switch ON for full cycle.
• Once done, switch OFF the power.
• Drain the water and rinse the sterilizer.