Mee Mee Advanced 3-in-1 Sterilizer and Warmer

Mee Mee Advanced 3-in-1 Sterilizer and Warmer Features

• No chemicals used for the sterilization of baby bottles and other accessories.
• The product is made up of BPA free plastic and is safety certified.
• It is highly durable and hygienic.
• A total of 6 bottles of different sizes can be sterilized.
• One cycle of sterilization takes 8 to 10 minutes.
• It not only sterilizes the baby bottles and accessories but also heats food and warms milk.
• It is very easy to handle.
• It comes with tongs so that it is easy to place and remove the accessories.
• The hot sanitizing unit is made up of stainless steel and is very easy to clean.

Mee Mee Advanced 3-in-1 Sterilizer and Warmer Specifications

• Weight: 1.8 kg
• Product measurements: 24.6 x 20.2 x 14.7 cm

How to Use Mee Mee Advanced 3-in-1 Sterilizer and Warmer

First-time use:

• Measure 90ml of water and add it to the heating plate of the sterilizer.
• Now, place the main body and attach the basket.
• Add tong and a measuring cup in the basket.
• Close the sterilizer with a lid.
• Plug-in the sterilizer, and switch ON the sterilizer using the ON/OFF button behind the sterilizer.
• Push the front button to start the sterilizing process.
• After a few minutes, the device auto offs.
• Unplug the Mee Mee sterilizer and allow it to cool down.
• Open the lid and remove all parts one by one.
• Bottle and accessories sterilization:
• Measure 60ml of water and add it to the heating plate of the sterilizer.
• Attach the main body on the base.
• Place the bottles into the main body upside down.
• Now, place the basket and add bottle accessories, teethers.
• Close it with the lid.
• Plug-in the sterilizer, and switch ON the sterilizer using the ON/OFF button behind the sterilizer.
• Push the front button to start the sterilizing process.
• After a few minutes, the device auto offs.
• Unplug the Mee Mee sterilizer and allow it to cool down.
• Open the lid and remove bottles and accessories using a tong.

Warm milk:

• Measure 60 to 80ml of water and add it to the heating plate of the sterilizer. Water needs to be added based on the milk temperature. Freezer stored milk consumes 80ml of water to warm, and milk stored to room temperature consumes 60ml of water to warm the milk.
• Attach the basket on the base.
• Place the bottles and close it with the cap.
• Close the lid in a manner the small lids opened to fit the bottle caps.
• Plug-in the sterilizer, and switch ON the sterilizer using the ON/OFF button behind the sterilizer.
• Push the front button to start the sterilizing process.
• After a few minutes, the device auto offs.
• Unplug the Mee Mee sterilizer and allow it to cool down.
• Remove the bottles.

Accessories sterilization:

• Measure the water as per the guidelines and add them to the heating plate.
• Place the basket and add accessories.
• Close it with a lid.
• Plug-in the sterilizer, and switch ON the sterilizer using the ON/OFF button behind the sterilizer.
• Push the front button to start the sterilizing process.
• After a few minutes, the device auto offs.
• Unplug the Mee Mee sterilizer and allow it to cool down.
• Remove the accessories using a tong.

Heat Food:

• Add the water as per the guidelines (40ml for small jars and 80ml for large jars)to the heating plate.
• Place the main body and add the food jar without closing the lid.
• Close it with a lid.
• Plug-in the sterilizer, and switch ON the sterilizer using the ON/OFF button behind the sterilizer.
• Push the front button to start the sterilizing process.
• After a few minutes, the device auto offs.
• Unplug this sterilizer and allow it to cool down.
• Remove the accessories using a tong.